Bambu Lab Build Plates

Bambu Lab Build Plates — one swap, a different print

The build plate does more than hold a print down. It decides how the bottom face looks, how hot the bed has to run, whether you need glue, and which materials you can use at all. Genuine Bambu Lab plates are magnetic spring steel: they flex so finished parts pop off, then snap back dead flat on the heatbed. Pick the surface that matches the job below — all five options are on this page, so choose your finish from the dropdown and add it to the cart.

5 surfaces Magnetic spring steel Double-sided PEI PLA to PC Genuine Bambu Lab AU stock

---

The five surfaces, briefly

• Textured PEI — the all-rounder that ships with most Bambu machines. PEI powder sprayed on both faces, no glue needed for PLA, PETG, ABS or ASA, and the highest temperature ceiling here at 180 °C.
• Smooth PEI — a bonded PEI sheet that leaves a flat satin underside and grips harder. Excellent for ABS and ASA; PETG and TPU need a thin glue release film.
• Dual-Texture PEI — textured on one side, smooth on the other. Two finishes, one plate, one purchase.
• Cool Plate — holds PLA at roughly 35–40 °C instead of 55 °C, so big flat prints warp less. PLA-focused; not for TPU or the high-temp engineering materials.
• Galaxy — a decorative 3D Effect plate that embosses a shifting galaxy sparkle into the first layer. PLA and TPU only, and stunning under silk filament.

---

Which configuration is right for you?

Plate	Choose it if…	Underside finish	Materials	Price inc GST
Textured PEI	You want one plate that does almost everything, or a spare of the plate you already use	Fine matte texture	PLA, PETG, ABS, ASA, TPU, PA, PC	A$31.60
Smooth PEI	Flat bases need to look clean, or you print a lot of ABS and ASA	Smooth satin	PLA, PETG, ABS, ASA, PA, PC	A$41.80
Dual-Texture PEI	You can't decide, or one printer serves several people and jobs	Both — flip the plate	PLA, PETG, ABS, ASA, TPU, PA, PC	A$44.80
Cool Plate	You print mostly PLA and fight warping on large or tall parts	Smooth matte	PLA (PETG on SuperTack)	A$29.50
Galaxy	The look of the finished part matters more than material range	Glittering galaxy pattern	PLA, TPU	A$31.60

Short version: buying your first spare? Take Textured PEI. Want both finishes without buying twice? Dual-Texture PEI. PLA production work that keeps curling? Cool Plate. Selling or gifting the print? Galaxy.

---

Bed temperature and glue at a glance

Material	Bed temp on PEI plates	Glue?
PLA / PLA-CF / PLA-GF	45–60 °C (35–40 °C on Cool Plate)	No
PETG / PETG-CF	60–80 °C	No on textured · Yes on smooth
TPU	35–45 °C — Textured PEI only	Yes
ABS / ASA	90–100 °C	No on textured · Yes on smooth
PA / PAHT-CF / PC / PC-CF	90–110 °C	Yes — always

Glue on a PEI plate is a release agent, not an adhesive: a thin, even film stops aggressive materials welding to the surface and tearing the coating when you remove the part. Note that ABS, ASA, PA and PC are not recommended on the A1 mini.

---

Full specifications

Brand	Bambu Lab (genuine)
Plate sizes	256 × 256 mm usable (A1, P1 series, X1 series, P2S, X2D) · 180 × 180 mm usable (A1 mini)
Base material	Magnetic stainless / spring steel, 0.4 – 0.5 mm
Coating thickness	Textured PEI 0.075 mm · Smooth PEI 0.125 mm · Cool Plate SuperTack 0.05 mm
Max surface temperature	Textured PEI up to 180 °C · Smooth PEI and Cool Plate up to 120 °C
Usable sides	Two on the PEI and Galaxy plates
Compatible printers	A1 mini, A1, P1P, P1S, X1, X1C, X1E, P2S, X2D (varies by plate — check the variation)
Slicer plate types	Textured PEI Plate · Smooth PEI / High Temp Plate (also used for Galaxy) · Cool Plate
In the box	1 × build plate in your chosen surface
Packed weight & dimensions	[VERIFY]
Warranty	[VERIFY]

---

Who these are for

• Anyone running one printer hard — a second plate means the next print starts while you strip the last one.
• Small businesses and makers selling prints — the plate is your finish, and the Galaxy and Smooth PEI options sell parts on looks alone.
• Schools and shared workshops — Dual-Texture covers two finish requests with one item to keep track of.
• Engineering and functional printing — Textured PEI's 180 °C rating is what makes ASA, PA and PC practical.
• Anyone who has scratched a plate — a fresh surface fixes first-layer problems that no amount of levelling will.

---

Getting the best out of a new plate

• Tell the slicer which plate you fitted. Bambu Studio and Orca change bed temperature with the plate type — the wrong setting is the most common cause of a print letting go.
• Clean it properly. Warm water, a squirt of ordinary dish soap, a soft sponge, rinse well and dry with a lint-free towel. Skin oil is the enemy of adhesion.
• Handle by the edges once it's clean, and store it flat.
• Let it cool before removing prints, especially on the Cool Plate — around 35 °C and parts release almost on their own.
• Use Bambu's own glue stick or liquid glue where glue is called for; third-party adhesives can attack the coating.

---