Bambu Lab P2S vs X2D: Which Should You Buy?
13 November 2026 · 3 min read · NE3D Printing
The Bambu Lab P2S and X2D look almost the same from the outside. Both are enclosed, both take a 256 mm build plate, and both measure 392 × 406 × 478 mm. Inside, they are built for different work. The P2S is a fast single-nozzle printer for everyday materials. The X2D adds a second nozzle and a heated chamber, so it can print two materials in one job and handle engineering filaments with less warping.
Every figure below comes from Bambu Lab's official spec sheets for each printer.
P2S vs X2D at a glance
| Bambu Lab P2S | Bambu Lab X2D | |
|---|---|---|
| Nozzles | 1 | 2 (main + auxiliary) |
| Build volume | 256 × 256 × 256 mm | 256 × 256 × 260 mm (main nozzle); 235.5 × 256 × 256 mm printing with both |
| Max toolhead speed | 600 mm/s | 1,000 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Max hotend flow | 40 mm³/s | 40 mm³/s (65 mm³/s with the optional high-flow hotend) |
| Max nozzle temperature | 300 °C | 300 °C |
| Max bed temperature | 110 °C | 120 °C |
| Chamber heating | Not listed (enclosure only) | Active, up to 65 °C |
| Air filtration | Activated carbon | G3 pre-filter, H12 HEPA and activated carbon |
| Cameras | 1 (1080p) | 2 (1080p live view + 1600 × 1200 toolhead camera) |
| Touchscreen | 5-inch, 854 × 480 | 5-inch, 1280 × 720 |
| Max power | 1,200 W at 220 V | 1,600 W at 220 V |
| Weight | 14.9 kg | 16.25 kg |
The real difference: one nozzle or two
With an AMS, the P2S prints several colours or materials by swapping filament through its single nozzle. Each swap purges the old filament, which takes time and makes waste. It works well for multi-colour PLA, but it is slow on prints with many colour changes.
The X2D keeps a second filament loaded in its auxiliary nozzle. The most useful job for that is supports in a different material: soluble PVA, or a support interface that peels away cleanly from PLA or PETG. You get cleaner undersides and less time spent cleaning up a print.
The two nozzles are not equal. The main one has Bambu's high-precision motor and takes the widest range of filaments. The auxiliary one runs a standard stepper motor, does not take PLA Aero, and Bambu advises caution with silk PLA and carbon-fibre filled materials on it. Plan to print your main material on the main nozzle and keep the second for supports or a second plain material.
Engineering filaments and the heated chamber
Both printers have hardened steel nozzles and extruder gears, so both can run carbon-fibre and glass-fibre filled filaments. The difference is heat. The X2D heats its chamber to 65 °C and its bed to 120 °C, which keeps large ABS, ASA, PC and nylon parts from warping and cracking between layers. The P2S is enclosed and handles ABS and ASA well at normal sizes, but it has no chamber heater for the most demanding materials.
Classrooms and offices
For a school or workshop, filtration and power matter as much as speed. The X2D adds an H12 HEPA filter to the activated carbon, which helps in a shared room when printing ABS or ASA. The P2S draws less power: 1,200 W at most against the X2D's 1,600 W, and about 200 W while printing PLA. That makes it easier to run several printers on one circuit. For a lab printing mostly PLA and PETG, the P2S does the job at a lower cost per machine.
Which one to buy
- Choose the P2S if you print mostly PLA, PETG, ABS and ASA, want multi-colour prints with an AMS, or are fitting out a classroom with several printers. The Bambu Lab P2S comes on its own or as the P2S Combo with an AMS 2 Pro.
- Choose the X2D if you want soluble or breakaway supports, print engineering materials such as PC and nylon, or need HEPA filtration in a shared space. See the Bambu Lab X2D Combo.
Both ship from our Casula workshop at Bambu's Australian price, with support from our NSW team. Buying for a school or business? Request a quote or purchase order and we will reply within one business day.
