Bambu Lab Filament PLA Basic

Bambu Lab PLA Filament — 1.75mm, 1kg

Bambu Lab PLA is a well-regarded everyday filament that delivers consistent results whether you're printing your first benchy or producing end-use parts for a small business. PLA (Polylactic Acid) is one of the most widely used 3D printing materials for good reason — it's straightforward to print, produces sharp detail, and doesn't require an enclosure or heated chamber to get great results. It's a natural fit for hobbyists, students, educators, prototypers, and makers who want dependable prints without fussing over complex settings. Common applications include display models, cosplay props, architectural models, educational tools, signage components, organiser inserts, and low-stress functional parts.

Key Features

Print Settings Guide

These are general starting-point settings. Fine-tune based on your specific printer, part geometry, and desired finish.

• Nozzle Temperature: 210-220°C
• Bed Temperature: 45-60°C
• Print Speed: 40–80 mm/s recommended (adjust for detail level)
• Cooling: Part cooling fan recommended — typically 80–100%
• Bed Surface: PEI, glass, or smooth build plate — a light coat of glue stick can improve adhesion on glass
• Enclosure: Not required
• Compatible Printers: Bambu Lab printers (X1, P1, A1 series), Creality Ender & CR series, Prusa MK series, BambuStudio, PrusaSlicer, Cura, and any standard FDM printer with a 1.75mm hotend

Specifications

Available Colours

Choose from 24 colours — select your colour using the variation picker above.

Practical Tips

Storage: PLA absorbs moisture from the air over time, which can cause popping sounds during printing, rough surface texture, or brittle filament. Store unused spools in a sealed bag or airtight container with silica gel desiccant packs — especially important in humid Australian climates like Queensland and coastal NSW. If your filament has been sitting out for a while, drying it at around 45–50°C for 4–6 hours in a food dehydrator or filament dryer will usually restore its print quality.

First layer adhesion: PLA generally sticks well to most surfaces. If you're seeing first-layer lift, try lowering your print speed for the first layer, increasing bed temperature slightly, or applying a thin layer of glue stick to your build plate. A well-levelled bed makes the biggest difference — take the time to dial it in before troubleshooting elsewhere.