$38.99
Bambu Lab PLA Glow is a phosphorescent 1.75mm PLA that prints as easily as standard PLA by day and glows in the dark after a few minutes under any light source.
PLA Glow is Bambu Lab’s glow-in-the-dark PLA. It is a standard PLA base loaded with phosphorescent (luminous) powder, so it prints with the same low temperatures and forgiving behaviour you already expect from PLA — then charges under sunlight, room lighting or a UV torch and glows once the lights go out. It’s a favourite for Halloween props and cosplay, D&D miniatures and dice trays, night-visible light switch plates and door handles, glowing signage and light diffusers, classroom STEM projects, and any print that needs to be findable in the dark.
Because the glow effect comes from a real mineral additive rather than a dye, the filament is noticeably harder and more abrasive than plain PLA. Plan for a hardened steel nozzle before you start a spool — that single change is the difference between a great experience and a worn-out hot end.
Glows in the dark Low-temp PLA printing ±0.03mm tolerance RFID spool — auto AMS settings Up to 250mm/s 5 glow colours Reusable 1kg spool
Printer compatibility: works on any 1.75mm FDM printer that can run PLA — Bambu Lab X1, P1 and P2 series, A1, plus Prusa, Creality, Elegoo, Anycubic and similar machines. On Bambu Lab printers the RFID tag loads the correct profile automatically. Use a 0.4mm, 0.6mm or 0.8mm hardened nozzle; 0.2mm nozzles are not recommended as the glow powder can clog them. PLA Glow runs in the standard AMS, but Bambu Lab advises against feeding it through the AMS Lite — the stiff, rough filament creates enough feed resistance to cause failures, so load it direct from an external spool holder on A1 and A1 mini.
| Material | PLA Glow (glow-in-the-dark PLA) | Diameter | 1.75 mm | Diameter Tolerance | ±0.03 mm | Spool Weight | 1 kg net (supplied with reusable spool) | Print Temp | 190–230 °C | Bed Temp | 35–45 °C | Max Print Speed | < 250 mm/s | Nozzle Requirement | Hardened steel, 0.4 mm+ | Colours Available | 5 — Orange, Blue, Green, Pink, Yellow |
Glow Orange · 15300 Glow Blue · 15600 Glow Green · 15500 Glow Pink · 15200 Glow Yellow · 15400
All five share the same specs and print settings — choose your colour from the dropdown above. Note that each colour describes the daylight appearance of the spool; the glow itself is a soft luminous tone rather than a bright saturated colour, and Green is the brightest and longest-lasting of the range.
Fit the hardened nozzle first. The phosphorescent powder is genuinely abrasive and can visibly wear a brass or standard stainless nozzle within a single kilogram — a hardened steel nozzle is cheap insurance and keeps your extrusion width consistent right to the end of the spool.
Design for a brighter glow. Glow intensity depends on how much luminous material light can reach, so thicker walls (3–4 perimeters) and higher infill glow far more strongly than thin-walled prints. Charge the finished part under bright daylight or a UV torch for a couple of minutes before showing it off. And like all PLA, keep the spool sealed with desiccant between prints — damp filament causes stringing and a rough surface that dulls the effect.
Nour Engineering Solutions accepts returns or refunds for change of mind or wrong items ordered within 30 days from the purchase date. Customers need to return the items to Nour Engineering Solutions, ensuring the items are in brand new, unused condition. Customers will also be charged for the cost of the original shipping and a re-stocking fee equal to 10% of the order value.
In case of items arriving damaged or wrong items being sent to the customer, Nour Engineering Solutions will be responsible for either exchanging stock for the customer or issuing a refund.
In the case of defective returns, refunds will only be issued after the items are returned to Nour Engineering Solutions. Nour Engineering Solutions will be responsible for the return postage, and the customer should provide reasonable assistance for the defective items to be picked up by courier, such as packing the items and printing shipping labels.
Once the order is dispatched, it is the customer’s responsibility to follow up the shipment. If the items arrive damaged, the customer should notify Nour Engineering Solutions within 2 business days after receiving the order. If the item does not arrive within 2 business days of the expected delivery date, the customer should notify Nour Engineering Solutions immediately. Nour Engineering Solutions may refuse to refund or exchange items if the customer fails to do so.
In case the first delivery attempt is unsuccessful, the parcel will be forwarded to the local Post Office or News Agency. Failure to pick up parcels within the required timeframe may result in the parcel being returned to Nour Engineering Solutions. In this case, customers will be responsible for the costs associated with re-sending the parcel.
