Bambu Lab X2D Combo — Dual Extruder, 1,000mm/s, Multi-Material Flagship
The
Bambu Lab X2D Combo is Bambu Lab’s most capable desktop 3D printer — a true dual-extruder machine that combines 1,000mm/s print speeds with the new AMS 2 Pro multi-material system. Unlike single-extruder multi-colour setups, the X2D uses two independent nozzles: one direct drive, one Bowden, with a mechanical lift mechanism that keeps whichever nozzle isn’t printing well clear of your model. The result is cleaner multi-material prints, better soluble support performance, and zero-compromise dual-filament workflows.
If you’ve been running an X1C or P1S and want more — faster speeds, real dual extrusion, active chamber heating for engineering materials — the X2D is the natural next step. It’s also a serious option for small businesses and professional users printing in ABS, ASA, PA, PC, or carbon-fibre composites who need a consistent, enclosed, high-temperature environment on the desktop.
Key Features
Up to 1,000mm/s Print Speed
True Dual Extruder
AMS 2 Pro Included
Active Chamber Heating to 65°C
3-Stage Air Filtration
31 Integrated Sensors
Dual 1080p Cameras
240V AU Power Compatible
True Dual Extrusion — Not Just Colour Swapping
The X2D’s dual-extruder system is a step above the single-toolhead multi-colour printers. A direct-drive nozzle handles your primary filament; a second Bowden nozzle handles support or secondary material. A mechanical lift mechanism raises the inactive nozzle clear of the print surface — preventing ooze contamination and reducing the purge waste that single-nozzle multi-colour systems generate. This matters most when you’re printing soluble supports (PVA), multi-material functional parts, or any job where colour mixing would be a problem.
1,000mm/s — Twice the Speed of the X1C
The X2D doubles the X1C’s headline speed, hitting up to 1,000mm/s with 20,000mm/s² acceleration and a volumetric flow rate of 40mm³/s. In practice this means jobs that took an hour on the X1C can finish in significantly less time — without a reduction in surface quality. Active motor noise cancelling keeps the machine quieter than you’d expect at these speeds (below 50 dB).
AMS 2 Pro — Multi-Material with Active Drying
The included AMS 2 Pro handles up to four filament spools and now features active venting for passive drying — helpful when running hygroscopic materials like PA or TPU. Chain multiple AMS 2 Pro units to reach up to 24+ simultaneous materials on a single print. The system monitors filament levels, buffers feed, and handles automatic spool switching without interrupting your print.
Active Chamber Heating for Engineering Materials
The fully enclosed build chamber heats actively to 65°C. This is the feature that separates consumer from professional desktop printers: a hot chamber prevents warping and delamination in ABS, ASA, PA, and PC — materials that are notoriously difficult to print reliably in an uncontrolled ambient environment. When you don’t need the heat (PLA, PETG), a Cool Mode circulates fresh air instead. Three-stage filtration (G3 pre-filter + H12 HEPA + activated carbon) handles fumes and fine particles regardless of mode.
31 Sensors — Automation You Can Rely On
The X2D integrates 31 sensors covering everything from first-layer inspection (LiDAR + AI) to vibration compensation, flow calibration, and nozzle monitoring. Spaghetti detection and AI failure recognition monitor prints in real time. The dual-camera setup — a 1080p wide-angle liveview and a toolhead camera for close-up inspection — means you can monitor remotely with confidence rather than hope.
Who Is This For?
- X1C / P1S owners upgrading who want genuine dual extrusion and higher speeds
- Engineers & product designers printing in ABS, ASA, PA-CF, PC, or other engineering-grade materials that require a controlled hot chamber
- Small businesses running production prints who need throughput and reliability, not manual intervention
- Hobbyists & model makers who want true dual-material prints — PLA body + PVA soluble supports, or two-colour functional parts
- Schools & makerspaces needing an enclosed, filtrated, high-capability machine with remote monitoring
What’s in the Box
- Bambu Lab X2D 3D Printer
- AMS 2 Pro (Automatic Material System)
- PTFE tubes & AMS connection hardware
- Two hardened steel 0.4mm nozzles (pre-installed)
- Spare nozzle wiper pads
- Textured PEI build plate
- Maintenance tools kit (scrapers, hex keys, cleaning tools)
- Australian power cable (240V)
- Quick start guide
Note: Filament not included. Check our filament range for AMS 2 Pro-compatible options.
Compatible Materials
PLA / PLA+
PETG
TPU
ABS / ASA
PC (Polycarbonate)
PA (Nylon)
PA-CF / PA-GF
PVA (Soluble Support)
Technical Specifications
| Build Volume (Single Nozzle) |
256 × 256 × 260 mm |
| Build Volume (Dual Nozzle) |
235.5 × 256 × 256 mm |
| Max Print Speed |
1,000 mm/s |
| Max Acceleration |
20,000 mm/s² |
| Max Volumetric Flow Rate |
40 mm³/s |
| Layer Resolution |
0.05 – 0.35 mm |
| Extruder Configuration |
Dual — Direct Drive (primary) + Bowden (secondary) with mechanical nozzle lift |
| Nozzle Diameter |
0.4 mm hardened steel × 2 (swappable) |
| Max Nozzle Temperature |
300°C |
| Max Bed Temperature |
120°C |
| Enclosure |
Yes — fully enclosed with active chamber heating to 65°C |
| Air Filtration |
3-stage: G3 pre-filter + H12 HEPA + activated carbon |
| Bed Levelling |
Automatic (AI-assisted + LiDAR first-layer inspection) |
| Filament Diameter |
1.75 mm |
| AMS Version |
AMS 2 Pro (4 spools) |
| Max Materials per Print |
Up to 4 (expandable to 24+ with additional AMS 2 Pro units) |
| Integrated Sensors |
31 |
| Cameras |
Dual — 1080p liveview + toolhead camera |
| Connectivity |
Wi-Fi, USB |
| Internal Storage |
8 GB eMMC |
| Display |
5-inch touchscreen (1280 × 720) |
| Noise Level |
Below 50 dB (active motor noise cancelling) |
| Power Input |
100–240V AC, 50/60Hz (AU plug included) |
| Machine Dimensions |
392 × 406 × 478 mm |
| Machine Weight |
16.25 kg |
| Warranty |
[VERIFY] — sold by NE Print Shop (Australia) |
🇦🇺 Buying with Confidence from NE Print Shop
- Australian business — ABN registered, based in Australia
- Price shown is in AUD and includes GST
- Ships from within Australia — no international customs delays
- Australian-compatible 240V power cable included
- Local support — contact us at ne3dprinting.com.au
- Consumer guarantees apply under Australian Consumer Law
Nour Engineering Solutions accepts returns or refunds for change of mind or wrong items ordered within 30 days from the purchase date. Customers need to return the items to Nour Engineering Solutions, ensuring the items are in brand new, unused condition. Customers will also be charged for the cost of the original shipping and a re-stocking fee equal to 10% of the order value.
In case of items arriving damaged or wrong items being sent to the customer, Nour Engineering Solutions will be responsible for either exchanging stock for the customer or issuing a refund.
In the case of defective returns, refunds will only be issued after the items are returned to Nour Engineering Solutions. Nour Engineering Solutions will be responsible for the return postage, and the customer should provide reasonable assistance for the defective items to be picked up by courier, such as packing the items and printing shipping labels.
Once the order is dispatched, it is the customer’s responsibility to follow up the shipment. If the items arrive damaged, the customer should notify Nour Engineering Solutions within 2 business days after receiving the order. If the item does not arrive within 2 business days of the expected delivery date, the customer should notify Nour Engineering Solutions immediately. Nour Engineering Solutions may refuse to refund or exchange items if the customer fails to do so.
In case the first delivery attempt is unsuccessful, the parcel will be forwarded to the local Post Office or News Agency. Failure to pick up parcels within the required timeframe may result in the parcel being returned to Nour Engineering Solutions. In this case, customers will be responsible for the costs associated with re-sending the parcel.
