Bambu Lab Liquid Glue

Bambu Lab Liquid Glue — 60 mL Build Plate Adhesive

Some prints just won't hold. Tall ABS parts curl off the corners, wide PETG bases lift mid-print, and slippery TPU wanders before the first layer even finishes. Bambu Lab Liquid Glue solves the problem at the source: a thin, even film of water-based adhesive that grips your model to the plate while it prints, then releases cleanly when the plate cools.

Unlike a glue stick, the liquid formula spreads into a genuinely flat layer — no ridges under the first layer, and noticeably less residue left on the bottom of the finished part. It's a small bottle that saves a lot of failed prints, which is why most Bambu owners keep one within arm's reach of the printer.

---

Why makers keep a bottle on the bench

Water-based formula Low odour Washes off with water ~100 applications All Bambu plates Less model residue

• Stops warping and lift-off. Ideal for large-footprint parts, tall thin geometry and high-shrinkage materials like ABS and ASA.
• Even coat, every time. Press the applicator head to open the internal valve, then spread — the sponge tip lays down a consistent film instead of streaks.
• Cleans up with plain water. No solvents, no scrubbing. Rinse the plate and the base of the model and you're done.
• Protects your plate. Acts as a release layer between the filament and the PEI surface, which helps avoid the gouges that come from prying stuck parts loose.
• Kinder to the workshop. The low-odour, water-based formula is a genuine improvement if your printer lives in a classroom, office or spare bedroom.

---

How to use it

1. Start with a clean, cool plate — wipe off old glue and finger oils first.
2. Apply gentle pressure to the applicator head to open the internal valve and start the glue flowing.
3. Spread a thin, even layer across the print area only. More is not better; a light film is all you need.
4. Let it dry to a haze, load the plate and print as normal.
5. When printing finishes, let the plate cool fully, then pop the part off and rinse the plate and model base with water.

---

What's in the box

• 1 × Bambu Lab Liquid Glue bottle, 60 mL, with integrated valve-action applicator head

---

Compatible materials & recommended bed temperatures

Bambu Lab publishes these hotbed ranges for printing with liquid glue applied. Treat them as a starting point and fine-tune for your own filament.

Material	Recommended bed temp
PLA	40–60 °C
PETG	60–80 °C
PET	80–100 °C
ABS	90–100 °C
ASA	90–100 °C
TPU	30–45 °C

---

Specifications

Product code	LGL001
Net volume	60 mL
Net weight	80 g
Approx. coverage	~100 applications (full plate coat)
Formula	Water-based, low odour, water-washable
Applicator	Valve-action sponge head (press to dispense)
Compatible materials	PLA, PETG, PET, ABS, ASA, TPU
Compatible build plates	All Bambu Lab plates — Cool Plate, High-Temperature Plate, Textured PEI Plate
Package dimensions	30 × 30 × 139.5 mm
Shelf life	[VERIFY]
Price	A$28.50 inc GST

---

Who it's for

Anyone running a Bambu Lab printer who has lost a long print to a lifted corner. It's a cheap insurance policy for hobbyists printing large single pieces, a must-have for small businesses running ABS or ASA functional parts, and a sensible pick for schools and makerspaces where the low-odour, water-cleanup formula matters in a shared room.