Bambu Lab Dual-Texture PEI Plate — 256 mm (A1 / P1 / X1 / P2S / X2D)

Bambu Lab Dual-Texture PEI Plate — 256 mm

Most people end up owning two build plates: a textured one for everyday prints and a smooth one for parts that need a glossy, perfectly flat base. The Dual-Texture PEI Plate puts both on a single sheet of spring steel. Textured PEI on one face, smooth PEI on the other — flip it, re-seat it on the magnetic heatbed, and you've changed surfaces in about five seconds. One plate in the drawer instead of two.

It's a genuine Bambu Lab plate (part FAP011) sized at 256 × 256 mm usable, so it drops straight onto the A1, P1P, P1S, P2S, X1C, X1E and X2D with no adapters and no adjustments. Build-plate detection and the standard surface profiles in Bambu Studio work exactly as they should.

---

Which side for which job

Side	Finish on the part	Best for
Textured PEI 0.075 mm coating	Fine matte stipple, hides first-layer imperfections	Everyday PLA and PETG, functional parts, prints with big footprints, anything you want to look finished straight off the bed
Smooth PEI 0.125 mm coating	Glossy, mirror-flat bottom surface	Enclosures and lids that must sit flat, nameplates, signage, parts that get glued or bonded face-down

One habit worth forming: PETG and TPU bond very aggressively to bare smooth PEI and can lift flecks of coating when you remove a print. A thin wipe of glue stick as a release layer on that side solves it completely — and glue stick is also recommended for PC, PA and PAHT-CF on either surface.

---

Key features

• Two surfaces, one plate. Saves a slot in the plate rack and the cost of a second sheet — useful if you're running a small business or a classroom set where plates go missing.
• Flex-and-release removal. The 0.4 mm magnetic stainless steel core bends enough to crack parts loose by hand, then returns flat. No scrapers, no chisels, no gouged coating.
• Let it cool first. PEI's grip drops off sharply as the bed cools; at 35 °C or below most prints release with a gentle flex, and many pop free on their own.
• Wide material range. Rated from TPU at 35 °C through to PA and PET-CF at 120 °C, so the same plate follows you from first PLA benchy to carbon-filled engineering parts.
• Easy upkeep. Wash with warm water and dish soap, or wipe with isopropyl alcohol between prints. Skin oils are the number-one cause of "my bed stopped sticking" — handle it by the edges.

---

Who it's for

• Makers and hobbyists who want both finishes without buying and storing two plates.
• Small businesses running mixed jobs — matte functional parts in the morning, glossy-backed signage in the afternoon.
• Schools and makerspaces needing a hard-wearing, student-proof surface that doesn't rely on tape, hairspray or constant re-levelling.
• Anyone replacing a tired plate — PEI coatings are consumable, and a fresh one is the cheapest fix for first-layer problems.

---

Recommended heatbed temperatures

Material	Bed temp	Glue stick?
PLA / PLA-CF / PLA-GF	45–65 °C	No
PETG / PETG-CF	60–80 °C	Recommended on the smooth side
TPU	35–45 °C	Yes
ABS	90–100 °C	No
ASA	90–100 °C	No
PVA	45–65 °C	No
PC / PC-CF	90–110 °C	Yes
PA / PA-CF / PAHT-CF	100–120 °C	Yes
PET-CF / PET-GF	100–120 °C	No

Ranges are Bambu Lab's published guidance for their PEI surfaces — start in the middle of the range and adjust to your environment. Bambu Studio's built-in filament profiles already set sensible defaults.

---

Specifications

Brand	Bambu Lab
Part number	FAP011
Usable print size	256 × 256 mm
Surface A	Textured PEI, 0.075 mm coating
Surface B	Smooth PEI, 0.125 mm coating
Core	0.4 mm magnetic stainless spring steel
Max surface temperature	180 °C
Compatible printers	Bambu Lab A1, P1P, P1S, P2S, X1C, X1E, X2D
Not compatible	A1 mini (needs the 180 × 180 mm plate)
Finish options	Gold / charcoal grey (as supplied by Bambu Lab)
Packaged weight	0.45 kg
Package size	300 × 270 × 17 mm

---

What's in the box

• 1 × Bambu Lab Dual-Texture PEI Plate, 256 × 256 mm (textured PEI one side, smooth PEI the other)
• Protective packaging and Bambu Lab documentation

No tools required — lift the old plate off, wipe the heatbed clean, and locate the new plate against the front-left alignment pins. Run a quick bed-level/calibration in Bambu Studio or from the printer screen the first time you use it. This is a plate only; glue stick is not included.

---