Bambu Lab X/P AMS 2 Pro Upgrade Kit

$103.57~~$147.95~~inc. GST

Own a standalone X1 or P1? This is the kit that turns it into a multi-colour printer. Four-slot automatic colour switching and active filament drying on the machine you already have — A$89.70 inc GST, shipped from Australia. No new printer required. Does it fit your printer? Yes, if it's an X1 Carbon, X1E, P1P or P1S — the non-Combo models that shipped before the AMS 2 Pro and can't power it from the mainboard. Every part in one box — nothing to source mid-build. 24 V AMS 2 Pro Switching Adapter, 4-pin Bambu Bus Cable, Filament Buffer, 3 × PTFE tube couplers and pre-cut tubing (1 × 370 mm + 2 × 550 mm). Running inside an hour for most owners. A screwdriver-and-cable-routing job against Bambu Lab's own X1/P1 walkthrough — not a rebuild, and no splicing into your printer's power. Genuine Bambu Lab hardware — the same part numbers your firmware and Bambu Studio already expect. Be aware: the AMS 2 Pro unit is sold separately. This kit is the connection hardware that makes an AMS 2 Pro work on your printer — add the AMS itself if you don't own one yet. 🇦🇺 Dispatched from Australia — priced in AUD inc GST, no customs surprises, no overseas wait. Not sure about your exact setup? Message us your printer model before you order and we'll confirm the kit suits it — then add to cart knowing it fits.

Request a quote / PO

Availability: In stock, ships from NSW
SKU: BAMBU-LAB-XP-AMS-2-PRO-UPGRADE-KIT
Weight: 0.60 kg
Box: 12 × 6 × 8 cm
Shipping: Aramex Economy or Priority, quoted at checkout · Shipping & delivery

$103.57

About this product

Bambu Lab X/P AMS 2 Pro Upgrade Kit

Multi-colour printing and active filament drying on the X1 or P1 you already own — for A$89.70 inc GST, instead of the price of a new printer. Four-slot automatic material switching, filament runout handling and the AMS 2 Pro's drying chamber for PETG, PA and TPU that have been sitting out, all on your existing machine.

Before you order — the three things buyers ask
1. Will it fit my printer? Yes for the X1 Carbon, X1E, P1P and P1S. If you bought one of those as a standalone printer (not a Combo), this is the kit you need.
2. Why can't I just plug the AMS 2 Pro in? Those printers were built before the AMS 2 Pro existed, so they lack the dedicated power feed and the connector arrangement it expects. This kit closes that gap.
3. Is the AMS 2 Pro included? No — it's sold separately. This is the connection hardware only. Add an AMS 2 Pro to your order if you don't already have one.

Why you'd want this

Multi-colour on an existing X1/P1 Unlocks AMS 2 Pro drying Correct 24 V power adapter included Pre-cut PTFE — no guessing lengths Official Bambu Lab part A$89.70 inc GST

Everything in the box — and what each part is for

1 × AMS 2 Pro Switching Adapter (24 V power supply) — the AMS 2 Pro draws more than the X1/P1 mainboard can supply, so it runs from its own supply rather than a risky splice. Supplied for Australian 240 V mains.
1 × Bambu Bus Cable, 4-pin — carries the printer-to-AMS data link.
1 × Filament Buffer — takes up feed slack between the AMS and the extruder, which is the standard arrangement when you're running exactly one AMS 2 Pro. (Bambu Lab also sells an AMS Hub configuration of this kit for owners chaining multiple AMS 2 Pro units — the configuration we ship is [VERIFY].)
1 × PTFE Tube, 370 mm + 2 × PTFE Tube, 550 mm — pre-cut, no measuring. These three lengths cover the printer-to-buffer and buffer-to-AMS runs on both the enclosed (X1C/X1E/P1S) and open-frame (P1P) layouts.
3 × PTFE Tube Coupler — joins the runs cleanly.

Genuine Bambu Lab hardware throughout — the same part numbers your printer's firmware and Bambu Studio expect, so you avoid third-party adapter quirks.

How hard is the install? About an hour.

It's a screwdriver-and-cable-routing job, not a rebuild. Bambu Lab publishes a step-by-step installation walkthrough for the P1S and X1 series, and most owners have it running inside an hour. Once it's on, you get four-slot automatic material switching, filament runout handling, and the AMS 2 Pro's active drying chamber.

Update your firmware first. P1 series firmware supports the AMS 2 Pro from version 01.08.00.00 onward (01.09.00.00 and later is recommended for full compatibility), and X1 series printers may need a microSD-card firmware update to recognise it. Bambu Lab's guidance is to disconnect the AMS 2 Pro while flashing firmware, then reconnect it — updating the printer also updates the attached AMS.

Specifications

Product	Bambu Lab X/P AMS 2 Pro Upgrade Kit
Brand	Bambu Lab
Purpose	Adds AMS 2 Pro compatibility to non-Combo X1/P1 printers
Compatible printers	X1 Carbon, X1E, P1P, P1S
Data cable	Bambu Bus Cable, 4-pin × 1
Power	AMS 2 Pro Switching Adapter × 1 (AU plug / AU mains — [VERIFY] plug type on delivery)
Feed management	Filament Buffer × 1 (single-AMS configuration)
PTFE tubing	1 × 370 mm, 2 × 550 mm
Couplers	3 × PTFE tube coupler
Minimum firmware	P1 series 01.08.00.00+ (01.09.00.00+ recommended); X1 series via firmware update
AMS 2 Pro included?	No — sold separately
SKU	BAMBU-LAB-XP-AMS-2-PRO-UPGRADE-KIT
Packed weight	[VERIFY]
Price	A$89.70 inc GST

Who it's for

Hobbyists who started with a bare P1P or P1S and now want multi-colour prints without buying a whole new machine. Small businesses and print farms standardising older X1C units onto AMS 2 Pro so drying and material tracking work the same across every printer. Schools and makerspaces extending the life of existing X1/P1 hardware — a cable kit is a far easier purchase order than a new printer.

Buying from NE Print Shop
Genuine Bambu Lab hardware, stocked and dispatched from Australia — no overseas wait, no customs surprises. All prices in AUD inc GST, with tax invoices for business and school purchases. The included switching adapter is supplied for Australian 240 V mains.

Still deciding? Tell us your printer model and whether you already own an AMS 2 Pro, and we'll confirm this is the right kit before you pay. Otherwise — add it to your cart and it ships from Australia.

See all →