Bambu Lab
Bambu Lab Textured PEI Plate — H2D / H2S (350 × 320 mm)
$89.99inc. GST
The genuine Bambu Lab textured PEI build plate sized for the big H2 bed — grippy first layers while hot, hands-free release once cool. Fits Bambu Lab H2D, H2D Pro and H2S — 350 × 320 mm usable print area (SKU FAP025) PEI powder coating (0.075 mm) on a flexible magnetic spring-steel plate — flex it and prints pop off Rated to 180 °C surface temperature — PLA, PETG, ABS, ASA, PC, PA, TPU and PVA all supported No glue for everyday printing — only TPU, PC and PA need a glue stick Matte, lightly stippled bottom finish that hides elephant-foot and bed marks 🇦🇺 Ships from Australia
- Availability
- Sold out
- SKU
- FAP025
- Weight
- 0.78 kg
- Box
- 40.8 × 38.8 × 1.7 cm
- Shipping
- Aramex Economy or Priority, quoted at checkout
Bambu Lab Textured PEI Plate — H2D / H2S (350 × 320 mm)
$89.99
About this product
Bambu Lab Textured PEI Plate — H2D / H2S (350 × 320 mm)
Your build plate is the one part of the printer that every single job touches, and on a machine as big as the H2D or H2S it takes a beating. This is the genuine Bambu Lab textured PEI plate cut for the full 350 × 320 mm H2-series bed — a sheet of flexible magnetic spring steel finished in powder-coated PEI. Hot, it grips large ABS and PETG parts hard enough to stop corners lifting. Cooled to roughly 35 °C, that grip releases on its own, so most prints lift away with a gentle flex instead of a scraper and a held breath.
Keep it as a second plate so one can cool while the next job starts, dedicate it to a material that's chewed up your original, or simply replace a plate that's done its time — PEI is a consumable and adhesion fades with use. Printing straight onto textured PEI also leaves a clean, matte stippled underside that most people prefer to the glassy look of a smooth plate.
Why makers keep one spare
Full 350 × 320 mm bed coverage Self-release when cool 180 °C rated surface Glue-free for PLA, PETG, ABS & ASA Matte textured first layer Genuine Bambu Lab part
- Big-part adhesion. Large footprints in ABS, ASA, PC and PA are where warping bites hardest. Textured PEI gives the mechanical key those materials need across the whole 350 × 320 mm area.
- Forgiving of a hard life. Powder-coated PEI tolerates scrapers, spatulas and the occasional purge blob far better than a film-laminated surface, and a light pass with 600-grit sandpaper brings back adhesion that's gone glossy.
- Wash it in the sink. Warm water and dish detergent strips finger oils — the number one cause of "it printed fine yesterday" adhesion failures. Never use acetone; it attacks the PEI.
- Run two plates, print more. Schools and small production shops swap a finished plate straight out, start the next job, and harvest parts off-printer.
Who it's for
Anyone running a Bambu Lab H2D, H2D Pro or H2S. If you own a smaller Bambu machine — A1, A1 mini, P1, X1, P2S, X2D, H2C or A2L — this plate will not fit; check our matching listing for your printer's bed size before ordering. This is a passive accessory: no power supply, no adapter, nothing to plug in.
What's in the box
- 1 × Bambu Lab Textured PEI Plate, 350 × 320 mm usable print area (FAP025)
- Protective packaging — the plate ships flat; no tools or hardware required to fit it
Compatible materials & bed temperatures
| Material | Heatbed temp | Glue stick needed? |
|---|---|---|
| PLA / PLA-CF / PLA-GF | 45–60 °C | No |
| PETG / PETG-CF | 60–80 °C | No |
| PET-CF | 80–100 °C | No |
| ABS | 90–100 °C | No |
| ASA | 90–100 °C | No |
| PC / PC-CF | 90–110 °C | Yes |
| PA / PA-CF / PAHT-CF | 90–110 °C | Yes |
| TPU | 35–45 °C | Yes |
| PVA | 45–60 °C | No |
Set Plate Type → Textured PEI Plate in Bambu Studio or the printer's touchscreen so the slicer loads the right bed temperatures and flow settings.
Specifications
| Model / SKU | FAP025 |
| Compatible printers | Bambu Lab H2D, H2D Pro, H2S |
| Usable print size | 350 × 320 mm |
| Construction | PEI powder coating over magnetic stainless spring steel |
| Steel plate thickness | 0.4–0.5 mm |
| PEI coating thickness | 0.075 mm |
| Max surface temperature | 180 °C |
| Surface finish | Textured (both sides powder-coated PEI) |
| Slicer plate type | Textured PEI Plate |
| Package size | 408 × 388 × 17 mm |
| Gross weight | 0.78 kg |
| Cleaning | Warm water + detergent or IPA. Never acetone. 600-grit sandpaper to restore adhesion. |
| Brand | Bambu Lab (genuine part) |
🇦🇺 Buy with confidence from NE3D Printing
Genuine Bambu Lab stock held and dispatched from Australia, with fast courier delivery to every state and territory. All prices shown include GST and your tax invoice is emailed automatically — handy for school and business purchase orders. Not sure whether this plate suits your printer or your filament? Message our Australian-based team; we print on these machines daily and we'll tell you straight.
